The Mortara Holter monitor is a single component monitor with built-in symptom and activity capture that continuously records beat-to-beat data for the prescribed period of time.
COMPACT AND PORTABLE REMOTE MONITORING TECHNOLOGY
Caution: U.S. Federal law restricts this device to sale by or on the order of a physician.
Wired Holter Analysis Solution Across the Continuum of Care
Compact and portable device
Allows for 3-channel ECG capture and storage
Simple and convenient upload capability
ADVANCED ARRHYTHMIA DETECTION ONE BEAT AT A TIME
- Efficient Output
- Near real-time ECG data provides validation of the patient hook-up
- Recorded data is uploaded directly to our monitoring center for processing
| Dimensions: 2.5 x 1.0 x .75” (64 x 25 x 19 mm) 1 ounce (28 grams) without battery | Input Channels: Simultaneous acquisition of 3 channels | Standard Leads Acquired: Modified I, II, III, aVR, aVL, aVF and V | Operating Temperature: 1 0 to +45°C | Storage Temperature: -20°C to +25 | Relative Humidity: 5 to 95%, non-condensing Ambient Air Pressure: 700 to 1060 millibars | Battery: 1 AAA alkaline required | Digital Sampling Rate: 180 s/sec/channel used for standard recording and storage | A/D Conversion: 12 bits | Device classification: Type CF defibrillator-proof applied parts, internally powered | Input Impedance Input Dynamic Range Electrode Offset Tolerance Frequency Response: Meets or exceeds the requirements of IEC 60601-2-47
| Internal, non-volatile memory; up to 48 hours