BodyGuardian Heart is a small, discreet, wireless monitor. It attaches to your chest via the disposable BodyGuardian Strip, with medical-grade adhesive and electrode gel and can be repositioned when needed.

The strip should be replaced periodically during your monitoring period. This technology allows you to go about your normal life and daily activities without restrictions. You have complete mobility while your heart is being monitored.

Caution: U.S. Federal law restricts this device to sale by or on the order of a physician.

Your monitor does not summon physicians nor emergency assistance and does not replace direct communication with your healthcare provider. If you have medical concerns or health symptoms, contact your doctor or healthcare professional. If you have a medical emergency, call 911 immediately.


What type of adhesive came with your monitor? 



External Dimensions
| Width: 50 mm | Height: 59 mm | Depth: 16.4 mm | Weight: 35 g
| Capacity: 350 mAh minimum / 380 mAh typical | Battery Type: Rechargeable Li-ion | Battery Charger Power Requirement: 100-240 VAC / 50-60Hz | Monitor Battery Charger Output: 6 VDC @ 200mA | Battery Voltage: 3.7 VDC | Operating Temperature: +10oC to +45oC / +50oF to +86oF | Storage Temperature: -10oC to +30oC / +14oF to +86oF | Operating Humidity: 30% to 75% | Storage Humidity: 30% to 75% (excluding condensation)
| Sample Rate: 256 Hz | Digital Resolution: 12 bit | Input Dynamic Range: ±10 mV | Input Offset Dynamic Range: ±300 mV
Sample Rates
| ECG: 256Hz | Impedance: 32Hz | Accelerometer: 10Hz
Measurement Ranges
| Heart Rate: 25 to 240 bpm (±2 bpm) | Impedance: 0 to 120 Ohms | Respiration: 0 to 30 breaths/min (±1 breaths/min) | Activity: ±2g range in x,y,z directions ( some measurements are not currently included in reports)
Data Storage
| Capacity: 24-hour continuous | Type: Internal NAND Flash | Communications Type: Bluetooth between monitor and phone